Armil/CFS carries a range of ceramic fiber blankets for applications up to 3000°F (1650°C). Ceramic fiber blankets are lightweight, efficient insulators highly resistant to thermal shock and chemical attack. Durablanket® products are spun from long, high-purity alumina and silica based Fiberfrax® ceramic fibers producing a blanket with exceptional handling strength.
Durablanket products have excellent chemical stability and are unaffected by most chemicals except hydrofluoric and phosphoric acids and concentrated alkalis. Durablanket® is used throughout the metals, ceramic, glass, heating, and chemical industries.
Some features of our Fiberfrax Durablanket® products include:
Shop Ceramic Fiber Blankets Online or Request a Quote Today!
Fiberfrax Durablanket® S is a strong, lightweight needled blanket made from spun alumina silica ceramic fibers. Available in 24” and 48” widths, thicknesses from 1/4” - 2”, and 4pcf, 6pcf, and 8 pcf densities. Durablanket®S is used in a variety of furnace, kiln, boiler, and incinerator linings. Durablanket® products are also used for investment casting mold wraps. Furnace door seals, expansion joints, high temperature gasketing, ans high temperature stack linings.
Fiberfrax Durablanket LT and LT Z offer enhanced thermal performance and handling. Durablanket LT and LT Z offer improved thermal conductivities, allowing for improved lining performance. LT and LT Z products allow the use of reduced lining thicknesses to achieve the same thermal performance. Durablanket LT is a 2400°F grade blanket, (recommended operating temperature of 2200°F ) while LT Z is a 2600 grade (recommended operating temperature of 2400°F). LT and LT Z are available in 6pcf and 8 pcf densities.
Fiberfrax Durablanket 2600 is produced from high purity alumina, silica, and zirconia spun ceramic fibers, extending the high temperature performance of the Durablanket product line. Durablanket 2600 has extremely low shrinkage at elevated temperatures. Applications include linings in forging furnaces and ceramic kilns, panel test furnaces, reheat furnaces, incinerations equipment, etc.
Fiberfrax MoistPak D® is a flexible ceramic fiber insulation that air dries to form a hard, rigid structure, MoistPakd IS made froM high-strength ceramic fiber blanket impregnated with an inorganic bonding agent. This ceramic fiber blanket is ideal for insulating complex shapes or for applications seeing high gas velocities. Moist Pak D is packaged in a clear poly bag to retain the wet binder. Applications include pipe wrap, hot face linings, hot gas duct and flue linings.
Fibermax Needled Blankets and Fibermax Mats are high temperature, light weight and flexible insulations manufactured from 72% alumina polycrystalline mullite fibers for temperatures up to 2912°F. Fibermax blankets offer excellent thermal stability and thermal shock resistance at elevated temperatures where standard ceramic fiber blankets can not perform. Needled blankets are available in 6pcf and 8pcf versions. Fibermax needled blankets are commonly used in porcelain kilns, Refractory production kilns, Reheat furnaces, incineration equipment, atmosphere furnaces, etc.. Fibermax Mat is a very low density product (1.5 pcf) often used as expansion joint packing, burner wraps, or batten strips with fiber modules.
Saffil® alumina blankets are needled from high-purity 95—97% alumina polycrystalline fibers designed for use at temperatures up to 2912°F. Low shrinkage at high temperatures ensure long lining life in high temperature applications, The high alumina content insures that linings will not degrade over time. Saffil blankets also contain very low amounts of unfiberized material (shot), resukting in low thermal conductivity. Saffil Blankets are commonly used in high temperature kilns, furnaces , and heaters through out the ceramics, chemical, and steel industries.
