Ceramic Fiber Coatings, Patches, Cements

New! Silplate Mass 1500

Silplate Mass 1500 is a high-temperature coating for all refractory substrates. Some of the key features and benefits are as follows:

Silplate Mass 1500 when applied on hard refractory surfaces, has the following benefits:

Silplate Mass 1500 when applied on ceramic fiber lining systems, has the following benefits:

Silplate Mass 1500 Typical Composition

Armil CFS is also a stocking distributor and fabricator for Unifrax Fiberfrax® ceramic fiber products.

Fiberfrax® ceramic fiber products are manufactured from alumina-silica materials and exhibit high temperature-resistant stability to 2600°F. Fiberfrax Ceramic Fiber products are characterized by low thermal conductivity, low heat storage, excellent thermal shock resistance, lightweight, and superior corrosion resistance.

Ceramic Fiber Coatings & Fiberfrax®

The Fiberfrax® Specialties family of products includes Fiberfrax moldables, pumpables, topcoats, caulks, coating cements, rigidizers, tamping mix, and Moist-PackTM blanket. These products contain a wet, inorganic binder to provide both strength and hardness at elevated temperatures. The range of product forms provides a choice of materials to address a wide range of application problems. These include:

Fiberfrax Specialties also possess the advantages inherent with other Fiberfrax ceramic fiber insulating materials: high-temperature resistance, excellent insulating properties, thermal shock resistance, chemical stability, and ease of installation. Ceramic Fiber Coatings are refractory coating cement and are a high-temperature, air-setting refractory cement used as an adhesive to securely bond product forms to refractory oven surfaces.

Ceramic Fiber Products and Insulating Materials

Armil CFS & Fiberfrax Specialties also possess the advantages inherent with other Fiberfrax ceramic fiber products and insulating materials such as:


Armil CFS & Fiberfrax ceramic fibers products are available in many product forms that have applications in a wide range of high-temperature applications. Fiberfrax Ceramic Fiber products have traditionally been used in Ferrous and Non-Ferrous metal production, Petrochemical and Power production, and in Ceramic / Glass industries. In addition, Fiberfrax ceramic fiber products are more commonly used for abrasion and heat resistance and are found in these industries:

Rescobond 3000

RESCOBOND 3000 is a phosphate bonded, chemically setting refractory castable prepared for use by mixing with water. It develops a quick set and can be heated shortly after installation to provide your unit’s fast “back online” capability. In addition to its use as a primary lining, RESCOBOND 3000’s chemical bonding system provides adherence to existing refractory, making it an effective patching material. RESCOBOND 3000 can be installed by gunning, vibration casting, or hand-packing techniques.

Armil CFS & Fiberfrax

Armil CFS personnel install ceramic fiber coatings into a wide variety of high-temperature equipment, in applications ranging from ceramic kilns operating at over 3000°F to backyard wood-fired pizza ovens. Armil CFS stocks

Please feel free to contact us to discuss your high-temperature applications.


Since 1968, Armil CFS has designed and manufactured high-temperature process equipment, including furnaces, kilns, and incineration equipment. In addition, Armil CFS is a distributor for leading high-temperature insulation and refractory products.